Siding Replacement in Gloucester Township, NJ
Yes — we replace siding across Gloucester Township: Blackwood, Glendora, Sicklerville, Erial, Laurel Springs and every neighborhood in between. This is Camden County’s largest township, and most of it was built between the 1960s and the 1980s VERIFY: township housing-age data — ranches, split-levels and colonials in aluminum and first-generation vinyl. Much of that siding is now 40-plus years old and reaching the end together, which is why so many of your neighbors are re-siding in the same few years. We start with a free measured estimate and a written, line-item proposal, and we photograph every hidden finding before we price a repair.
What kind of siding is on Gloucester Township homes?
The 1960s–70s sections — Blackwood, Glendora — went up in aluminum siding over wood framing, and a lot of it is still there: chalked, dented and faded but hanging on. The 1970s–80s growth in Sicklerville and Erial brought early vinyl, and that first-generation product is now brittle, cracked at corners, and often nailed so tight the panels can’t move with temperature — which is what makes siding ripple or “oil-can” on hot days VERIFY: vinyl expansion requirements, manufacturer install instructions.
Behind those panels we typically find little or no housewrap (the water-resistive barrier) and flashing that amounts to caulk and hope around windows. The sheathing (wood panels under the siding) on these homes is usually sound except at roof-to-wall joints and below windows — exactly the spots we photograph first. Repairs are priced at a unit rate you approve before we touch them. Why vinyl goes wavy.
HOAs and approvals in Gloucester Township
Gloucester Township’s older neighborhoods generally have no homeowners association — color and material are your call. Some newer Sicklerville-area developments and townhome communities do have associations with architectural approval requirements VERIFY: your association’s guidelines, and we supply samples and spec sheets for those boards. With so many township homes re-siding at once, one practical tip: if several houses on your street are getting estimates, ask us about coordinating colors so the block keeps its variety.
Get the FREE 16-page Siding Guide
What gets removed, repaired, wrapped, flashed and warrantied — before you sign anything. Includes the 2-page “Before You Sign” quote checklist.
Text Me the Free GuideDo I need a permit for siding in Gloucester Township?
Siding permits go through the Gloucester Township construction office, and we handle the filing. Where a permit is required, we apply before work starts, post it at your home and schedule the final inspection at completion. We confirm the current requirement for your address at proposal time VERIFY: Gloucester Township construction office.
Township permit information: [LINK: Gloucester Township construction office permit page]. Statewide basics: Do I Need a Permit to Replace Siding in NJ?
Recent siding projects in Gloucester Township
Ranch, aluminum to vinyl. Lead-safe tear-off, sheathing repairs below two windows, full housewrap and reflash, new vinyl and trim.
Listing publishes with completed local project.
Colonial, wavy vinyl replacement. Removed over-nailed panels, corrected sheathing at a roof joint, installed insulated vinyl hung loose for movement.
Listing publishes with completed local project.
What Gloucester Township homeowners say
[REVIEW: add Gloucester Township review when collected]
Also see our work in nearby Washington Township and Deptford, compare vinyl options, or review current price ranges.
Gloucester Township siding questions
The vinyl on my Sicklerville home is rippling in the heat. Can it be fixed without replacing it?
Waviness usually means panels were nailed too tight to move with temperature. Individual courses can sometimes be re-hung, but if the whole house was nailed the same way, replacement installed correctly — hung loose with proper expansion gaps — is the lasting fix. Read the full answer.
Is it worth tearing off aluminum that still looks okay?
If the aluminum is sound, the decision is about what’s behind it. Aluminum jobs from the 60s and 70s usually have no housewrap and minimal flashing. A tear-off lets us rebuild those layers — the ones that actually keep water out — before new siding goes on. More on tear-offs.
My Gloucester Township home was built before 1978. Do lead-safe rules apply?
Yes. Tear-off on a pre-1978 home falls under federal RRP rules: containment, careful cleanup and documentation when painted surfaces are disturbed. We build the lead-safe setup into your proposal and give you the required pamphlet first. VERIFY: current EPA RRP requirements
Who files the siding permit in Gloucester Township?
We do, through the Gloucester Township construction office. Where required we apply before work starts, post the permit on site and schedule the final inspection. VERIFY: Gloucester Township construction office